Category Products
Partner Links
Ultrasonic Flaw Detector
Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.
Anda juga bisa memesan via telephone. Silakan hubungi sales consultant, Hotline kami di, sales@alatlabor.com
sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamatAbout Ultrasonic Flaw Detector
TUD310 is a basic Ultrasonic Flaw Detector with excellent inspection performance. It is simple and can be used in a wide variety of applications.
Features
● Four ways to present waveform: positive half-wave, negative half- wave, full wave and radio frequency.
● Automatic gain adjustment, defect equivalent calculation and peak memory function
● Two high resolution scanning mode: A and B
● Display of echo envelope
● Two individual gates setting and alarming function.
● 32 detecting channels are available with separate detecting parameters and DAC (Distance Amplitude Correction) curves in every channel.
● Automatic formation of DAC curves, and 30 points’ data can be recorded infinitely, adjustable offset curves and gain correction functions are available.
●Three detecting modes(single-probe, dual crystal probe and transmission) with automatic calibration function
● Connected to PC via USB interface with advanced software for data analysis and management.
● Data and documents are managed with file allocation table (FAT)system, making the management of inspection data more convenient, reliant and faster
● Super large memory up to 32M, 1000 echo data can be stored.
● EL Highlight matrix display (no drift with angle, temperature or sunlight)
● Brand new digital signal circuit is designed for TUD310
● Digital signal processor (DSP) is used for signals analyzing, making circuit noise reduced properly and waveform more stable.
● EPSON ink-jet printers can be connected with TUD
● Real-time waveform display and review
Standard Delivery |
|
Optional Accessory |
Main unit |
1 |
Connecting cable |
Power adaptor |
1 |
Software for TUD310 |
Neck strap |
1 |
Various probes |
Cable for probe |
2 |
EPSON ink-jet printer |
Straight probe(2.5MHz,Ø20) |
1 |
|
Angle probe(5MHz,8×9K2) |
1 |
|
Couplant |
1 |
|
Flash disk |
1 |
|
Screw driver |
1 |
|
TIME certificate |
1 |
|
Warranty card |
1 |
|
Instruction manual |
1 |
Technical Specifications
Items |
Description |
Scanning range |
2.5 mm ~9999 mm |
Scanning resolution |
0.1mm (2.5mm ~100mm) |
Gain range |
0dB ~110 dB |
D-delay |
-20µs~+3400µs |
P-delay |
0µs~99.99µs,resolution 0.01µs |
Sound speed |
1000 m/s~9999m/s |
Bandwidth |
0.2MHz~15MHz |
Vertical linearity accuracy |
≤3% |
Horizontal linearity accuracy |
≤0.2% |
Dynamic range |
≥32dB |
Rectification |
Positive half wave, negative wave, full wave, and RF |
Sensitivity leavings |
≥60dB |
Test mode |
Pulse-echo, dual and through transmission |
Pulser |
Spike excitation pulser |
Damping |
50ohms, 150ohms and 400ohms |
Reject |
Linear, 0-80% of full screen, variable in steps of 1% |
Unit |
Metric/inch |
Interface |
RS232 / USB |
Printer |
EPSON ink-jet printers |
AC requirements |
85-264V AC/1.0A,47-63Hz |
Temperature |
-10℃~40℃ |
Humidity |
20%~90%RH |
Power supply |
Li battery4×3.6V 4000mAh |
Charging time |
4~5hours |
Dimension (mm) |
243×173×70 |
Weight (g) |
1470 |